1. Remove the portable PA system from its shipping case, along with all the cords.
2. Be sure to plug the power cord into the rear of the mixer board, and the other end into the closest outlet.
3. Hook the two speakers up to the mixer board, and to each other.
4. If you will be hooking the mixer board and/or speakers up to a projector, computer/laptop, musical instrument or microphone, be sure to attach the necessary connectors before you power on the portable PA sound system.
5. Power on the portable PA sound system.
6. Adjust the knobs on the mixer board to achieve the...

1. Remove the portable PA system from its shipping case, along with all the cords.
2. Be sure to plug the power cord into the rear of the mixer board, and the other end into the closest outlet.
3. Hook the two speakers up to the mixer board, and to each other.
4. If you will be hooking the mixer board and/or speakers up to a projector, computer/laptop, musical instrument or microphone, be sure to attach the necessary connectors before you power on the portable PA sound system.
5. Power on the portable PA sound system.
6. Adjust the knobs on the mixer board to achieve the...

1. Remove the projector case from the FedEx box it was shipped in.
2. Take out the projector, power cord, VGA cord, projector remote, instructions and batteries and set everything on a table or desk.
3. Decide where you will be viewing your video/slide-show/etc.
4. Place the projector on a flat surface, and aim the front of it toward a white wall or projection screen (insert link to our screen rentals page)
5. Remove the projector lens cap
6. Unwind the power chord and plug the female end into the rear of the projector, at the bottom, and plug the male end into the closest...

1. Release the Velcro strap and separate the floor stand from the screen.
2. Setup the floor mount, or use the included wall mount bracket.
3. If using floor mount, loosen the knob to open the legs.
4. Set the screen on top of the floor mount, or place it in the wall bracket.
5. Open the screen to 4:3 for standard view, or extend it to wide-screen format at 16:9.
6. When finished, close the screen and remove from floor/wall mount.
7. Fold up the floor mount, tighten the knob to close the legs and re-attach it to the screen.
8. Re-Velcro the strap and your Epson Duet...

1. Remove aluminum screen frame and both legs from shipping case.
2. Unfold the screen frame completely and lie on a flat surface.
3. Repeat step 2 for both the legs as well.
4. Connect the legs to the screen frame while it's still lying on a flat surface.
5. Pull out the appropriate screen (gray-for rear projection or white-for front projection) from the shipping case, unfold it, and snap it to the screen frame.
6. Once the screen is secured to the screen frame, pull the legs and screen frame to the standing position.
7. When finished, lie the screen frame/screen down on a...

Rental Projectors, Inc has been a successful enterprise since its beginning and it wants to join in the evolution of the e-commerce movement. With the simplicity of point, click and rent, Rent a Projector Corporation provides an online experience that thrives on the ease of use and straightforward rental process that can be learned in no time.

It also offers the option to become a full-time member. This saves times on future visits for our loyal clients. For example, if you return to the site after ordering from us a month prior, once you sign in with your username and password, all...